Workpieces examples

Application possibilities for manufacturers throughout the high precision industries worldwide.

Carbide parts

Carbide Parts Hard turning has replaced grinding for the finishing of many hardened steel parts. Research and tests have shown that the Hembrug Mikroturn series are capable of bringing the same efficiencies to the manufacturing of precision cemented-carbide parts. Hard turning has replaced grinding for the finishing of many hardened steel parts. Research and tests [...]

Non-Ferro industry

The Mikroturn machine serie is mainly used for hard turning application but due to the machine tool characteristics, such as being extremely stiff (both static and dynamic), thermally stable, having very good damping properties with self lubricating bearings means that it can be applied for non ferro applications just as well.

Hydraulic Industry

Hardened pistons and control valves are used worldwide in a variety of sizes and are generally known for their close tolerances. The availability of standard, easily to change and not form specific tools that can machine several operations in one set-up means that the complete machining process chain can significantly be shortened when compared to [...]

Die & Mold Industry

Die & Mold Industry Die and Mold parts are known for their high requirements as far as form and dimensional accuracies concerns. Because hard turning allows you to machine complex contours in single clamping set-up it can mean a 3-4 times lower cycle time when compared to grinding. The accuracies that can and have been [...]

Bearing Industry

Bearings Hembrug has a lot of experience machining different kinds of bearings: inner- and outer cylindrical bearings, tapered bearings and ball bearings up to a diameter of 1400 mm. The availability of standard, easily to change and not form specific tools that can machine several operations in one set-up means that the complete machining process [...]

Ball Screw Nut Industry

. Manufacturing ball screw nuts by means of the traditional grinding has many disadvantages. The grinding wheel and shaft are limited by the bore diameter, profile depth and lead length effecting the strength of the tooling. The other disadvantage is the grinding wheel requires at interval dressing for sharpening and cleaning purposes making it a [...]