MikroTurnGrind 100
The MikroTurnGrind 100 offers unsurpassed accuracies in both hard turning and fine grinding. It allows applying the most suitable process for each surface to be machined in a single chucking set-up only
Advantages of using the MikroTurnGrind 100
- Lower costs per workpiece through the integration of two technologies in one machine
- Reduction of required process steps
- Reduced cycle times with only minimal material removal during the grinding cycle
- Micrometer part geometry by both hard turning and grinding workpieces in a single chucking
- Minimal set up and change over times. Therefore ideally suited for medium to large sized workpiece series where you often change workpieces.
Key features of the MikroTurnGrind 100
- Rigid natural granite machine base with an integrated system of vibration dampers
- Natural granite main spindle housing for improved static and dynamic stiffness and thermal stability
- Hydrostatic, wear free guideways having a 0.2 µm repeatability
- Hydrostatic, wear free main spindle having a 0.1 µm run-out and integrated torque motor
- Automatic tool changer for the cutting tools and grinding spindle
- All the heat and vibration generating elements are fully isolated from the machine
- Siemens 840D control with a 0.01 micron resolution
Options
- Grinding spindle
- Dressing unit(s)
- Tool and workpiece measurement
- Air or magnetic operated clamping units
- Chip conveyor
- Automatic tool changer / spindle changer
- High pressure coolant
Specifications
| Max. turning diameter (mm) | 380 |
| Max. workpiece weight incl. chuck (kg) | 50 |
| Max. spindle speed (rpm) | 4000 |
| Slide repeatability (µm) | 0.2 |
| Position accuracy (µm) | 1 |
| Weight (kg) | 6500 |
